Moosejaw Summer Clearance Sale. Free Shipping on Orders Over $49!
Every diver needs to know the basics of diving and they especially need to know all there is to know about their diving regulator. If you are new to diving, then you will need to learn how to choose the right scuba regulator for your diving needs and if you’re a seasoned diver you may want to brush up on what is best where dive regulators are concerned.
A Regulator – What is It?
Understanding what a diving regulator is and knowing what it does is very important before you think about buying one. A regulator is actually a pressure regulator which is designed to supply divers with the just the right amount of breathing gases which helps divers breathe underwater. The regulator is supposed to be attached to the cylinder holding the breathing gas in order for the right amount of doses of breathing gas to be given at the right time to the diver.
This needs to lower the air pressure during all the stages of the dive. You may have heard the terms diving regulator and demand valve being used in similar ways but in actual fact the demand valve is the part which is attached to the regulator and is responsible for allowing the gas to go the diver. When purchasing a regulator, it is very easy for you to get to know all the parts and you can always ask for a diagram that will help break it all down for you.
Features to Check Out
When making your choice in a diving regulator, there are some important features that will want to have in mind. It may not be wise to go with the first one you come across. Piston and Diaphragm regulators are the recommended ones you should look into. Between these two types of regulators, the only difference is that some people who dive in cold waters prefer the diaphragm as it works better for temperatures less than 40 degrees. By using a kit known as an environmental kit, the diaphragm regulator would be much similar to freeze proof.
The part of the scuba regulator which goes into your mouth is another feature that you might want to take a look at. Known as the second stage, it should have an adjustment on it to help you custom fit it to your desire. The swivel will help you lessen the hose line pull that you will have with a regulator, this is another thing you should look into.
Looking at the Cost
The final factor in making your choice in a diving regulator is the cost. You want to see what your budget will allow you to buy. You do not want to go with a regulator that is too cheaply made but you do not want to spend a small fortune either.
You should consider doing a bit more homework before making your final choice. A place which is up to date on the regulations that need to be met is where you should be looking for your regulator. Make sure that you get quality products when it comes to your diving equipment. Since your scuba equipment is the only thing keeping you alive while underwater, you will want to want to be as comfortable as possible to enjoy the experience even more.
